Convert AdblockPlus lists to Privoxy


Berita baik Untuk Pengguna Privoxy Web Filter.

privoxy-blocklist.sh ialah shell script untuk downloads, converts dan install AdblockPlus lists pada Privoxy.

privoxy.org adalah a non-caching web proxy with advanced filtering capabilities for enhancing privacy, modifying web page data and HTTP headers, controlling access, and removing ads and other obnoxious Internet junk. Privoxy has a flexible configuration and can be customized to suit individual needs and tastes. It has application for both stand-alone systems and multi-user networks.

Pengguna Privoxy yang menhadapi masalah menjalankan shell script itu bolehlah download hasil yang aku sudah buat. Aku akan update bila-bila aku suka nak update.

http://users.cjb.net/lnux/

Disclaimer :
Released as is and without any warranty.

Cara setting Privoxy
Edit file config.txt
# 2.4. actionsfile
# =================
#
# Specifies:
#
# The actions file(s) to use
#
# Type of value:
#
# Complete file name, relative to confdir
#
# Default values:
#
# match-all.action # Actions that are applied to all sites and maybe overruled later on.
#
# default.action # Main actions file
#
# user.action # User customizations
#
# Effect if unset:
#
# No actions are taken at all. More or less neutral proxying.
#
# Notes:
#
# Multiple actionsfile lines are permitted, and are in fact
# recommended!
#
# The default values are default.action, which is the "main"
# actions file maintained by the developers, and user.action,
# where you can make your personal additions.
#
# Actions files contain all the per site and per URL configuration
# for ad blocking, cookie management, privacy considerations,
# etc. There is no point in using Privoxy without at least one
# actions file.
#
# Note that since Privoxy 3.0.7, the complete filename, including
# the ".action" extension has to be specified. The syntax change
# was necessary to be consistent with the other file options and
# to allow previously forbidden characters.
#
actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
actionsfile default.action # Main actions file
actionsfile user.action # User customizations
actionsfile easylist.script.action
#
#
# 2.5. filterfile
# ================
#
# Specifies:
#
# The filter file(s) to use
#
# Type of value:
#
# File name, relative to confdir
#
# Default value:
#
# default.filter (Unix) or default.filter.txt (Windows)
#
# Effect if unset:
#
# No textual content filtering takes place, i.e. all +filter{name}
# actions in the actions files are turned neutral.
#
# Notes:
#
# Multiple filterfile lines are permitted.
#
# The filter files contain content modification rules that use
# regular expressions. These rules permit powerful changes on the
# content of Web pages, and optionally the headers as well, e.g.,
# you could try to disable your favorite JavaScript annoyances,
# re-write the actual displayed text, or just have some fun
# playing buzzword bingo with web pages.
#
# The +filter{name} actions rely on the relevant filter (name)
# to be defined in a filter file!
#
# A pre-defined filter file called default.filter that contains a
# number of useful filters for common problems is included in the
# distribution. See the section on the filter action for a list.
#
# It is recommended to place any locally adapted filters into a
# separate file, such as user.filter.
#
filterfile default.filter
filterfile user.filter # User customizations
filterfile easylist.script.filter
#
#
# 2.6. logfile

# 3.1. debug
# ===========
#
# Specifies:
#
# Key values that determine what information gets logged.
#
# Type of value:
#
# Integer values
#
# Default value:
#
# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
#
# Effect if unset:
#
# Default value is used (see above).
#
# Notes:
#
# The available debug levels are:
#
# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
# debug 2 # show each connection status
# debug 4 # show I/O status
# debug 8 # show header parsing
# debug 16 # log all data written to the network
# debug 32 # debug force feature
# debug 64 # debug regular expression filters
# debug 128 # debug redirects
# debug 256 # debug GIF de-animation
# debug 512 # Common Log Format
# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
# debug 2048 # CGI user interface
# debug 4096 # Startup banner and warnings.
# debug 8192 # Non-fatal errors
# debug 32768 # log all data read from the network
#
#
# To select multiple debug levels, you can either add them or
# use multiple debug lines.
#
# A debug level of 1 is informative because it will show you each
# request as it happens. 1, 1024, 4096 and 8192 are recommended
# so that you will notice when things go wrong. The other levels
# are probably only of interest if you are hunting down a specific
# problem. They can produce a hell of an output (especially 16).
#
# Privoxy used to ship with the debug levels recommended above
# enabled by default, but due to privacy concerns 3.0.7 and later
# are configured to only log fatal errors.
#
# If you are used to the more verbose settings, simply enable
# the debug lines below again.
#
# If you want to use pure CLF (Common Log Format), you should set
# "debug 512" ONLY and not enable anything else.
#
# Privoxy has a hard-coded limit for the length of log messages. If
# it's reached, messages are logged truncated and marked with
# "... [too long, truncated]".
#
# Please don't file any support requests without trying to
# reproduce the problem with increased debug level first. Once
# you read the log messages, you may even be able to solve the
# problem on your own.
#
debug 1 # Log the destination for each request Privoxy let through.
debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
debug 4096 # Startup banner and warnings
debug 8192 # Non-fatal errors
#

# 7. WINDOWS GUI OPTIONS
# =======================
#
# Privoxy has a number of options specific to the Windows GUI
# interface:
#
#
# If "activity-animation" is set to 1, the Privoxy icon will animate
# when "Privoxy" is active. To turn off, set to 0.
#
activity-animation 1
#
# If "log-messages" is set to 1, Privoxy will log messages to the
# console window:
#
log-messages 1
#
# If "log-buffer-size" is set to 1, the size of the log buffer,
# i.e. the amount of memory used for the log messages displayed in
# the console window, will be limited to "log-max-lines" (see below).
#
# Warning: Setting this to 0 will result in the buffer to grow
# infinitely and eat up all your memory!
#
log-buffer-size 1
#
# log-max-lines is the maximum number of lines held in the log
# buffer. See above.
#
log-max-lines 200
#
# If "log-highlight-messages" is set to 1, Privoxy will highlight
# portions of the log messages with a bold-faced font:
#
log-highlight-messages 1
#
# The font used in the console window:
#
log-font-name Bitstream Vera Sans
#
# Font size used in the console window:
#
log-font-size 10
#
# "show-on-task-bar" controls whether or not Privoxy will appear as
# a button on the Task bar when minimized:
#
show-on-task-bar 0
#
# If "close-button-minimizes" is set to 1, the Windows close button
# will minimize Privoxy instead of closing the program (close with
# the exit option on the File menu).
#
close-button-minimizes 1
#
# The "hide-console" option is specific to the MS-Win console version
# of Privoxy. If this option is used, Privoxy will disconnect from
# and hide the command console.
#
#hide-console
#
#

Latest version 3.0.17 ada dalam Debian testing repo.

Perihal lunix
pengguna linux

Komentar ditutup.

%d bloggers like this: